Menu
Your Cart

Development Boards

Model: ISC 514
Product Specifications:14 digital input/output port RX and TX, D2 ~ D13,Support external 3.3 V ~ 12 V dc power supply16 MHZ clock frequencyUsing Atmel Atmega328P - AU microcontroller1 to the TTL level a serial port to send and receive port RX/TX..
₹620.00
1PCS Upgarded STM32F407G-DISC1 Stm32f407 Discovery STM32F4 Development Board 1PCS Upgarded STM32F407G-DISC1 Stm32f407 Discovery STM32F4 Development Board
2-3 Days
Model: ISC 1039
Product Specification:Package Includes: 1 x STM32F407G-DISC1 BoardSTM32F407VGT6 microcontroller featuring 32-bit ARM Cortex-M4F core, 1 MB Flash, 192 KB RAM in an LQFP100 packageOn-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programmi..
₹3,550.00
Model: ISC 167
Product Specification:Microcontroller: AT91SAM3X8EInput Voltage (recommended): 7-12VFlash Memory: 512 KB all available for the user applicationsSRAM: 96 KB (two banks: 64KB and 32KB)Clock Speed: 84 MHzPackage Include: 1 x Arduino DUE, 1 x USB..
₹2,399.00
Model: ISC 165
Product Specification:Microcontroller ATmega2560-16AUUSB interface chip ATmega16U2Flash Memory 256 KB of which 8 KB used by bootloaderDigital I/O Pins 54 (of which 15 provide PWM output)Input Voltage(recommended) 7-12V..
₹1,099.00
Model: ISC 132
Product Specification:Micro-controller : ATmega328Operating Voltage : 5VDigital I/O Pins : 14 (of which 6 provide PWM output)Clock Speed :16 MHzPackage Include Arduino UNO R3 x 1 Note: USB is not included in the package..
₹550.00
Model: ISC 107
Product Specification:Chip Module: CP2102.Working Temperature: -40 ℃ ~ +125 ℃.Power Input: 4.5V ~ 9V (10VMAX), USB-powered.Drive Type: Dual high-power H-bridge driver.Current: continuous transmission ≈70mA (200mA MAX)Standby: <200uASize: (L)X(W)4.8X2.5cm/1.89''X0.98''(appr.)A great set of tools t..
₹380.00
Model: ISC 919
Product Specifications:Board Mode: LEDNARDO R3Operating frequency: 16MHzWorking voltage: 5VFlash Memory:32 KB (ATmega32u4) of which 4 KB used by bootloaderChip: ATmega32u4..
₹799.00
Model: ISC 1458
Product Specification:Full integration on one board: Mega R3 ATmega2560 and WiFi ESP8266 with memory 32Mb (megabyte)All of the modules can work together or each separately. And everyone has their own pinout headersThe convenient solution for the development of new projects requiring Uno and WiFiVia ..
₹1,499.00
Model: ISC 1123
Product Specification:For Original Product Select "Sold and fulfilled by INVENTO SALES"rduino compatible development board using the ATMEL ATtiny85 microcontroller. It has its own USB bootloader and built in USB capability, allowing you to program it with the SDK and also use it as native USB device..
₹270.00
Model: ISC 526
Product Specification:CH340G Replace FT232RLOperating Voltage(logic level):5V8 analog inputs ports:A0 ~ A7Support power supply by 9V batteryUsing Atmel Atmega328P-AU MCUPackage Include: 1 x NANO BoardNote: USB is not included in the package..
₹299.00
Model: ISC 355
Product Specifications:MEGA 2560 and RAMPS 1.4 set on a board, to solve complicated RAMPS 1.4 combination of interfaces, the problem of failure prone.Support up to 5 motor driver (A4988 or DRV8825)Can accept 24V input power under the same system can be hot-bed current is reduced to 1/4, an effective..
₹4,799.00
Model: ISC 909
Product Specifications:For Original product select "Sold and fulfilled by Invento Sales"ATmega328 running at 8MHz with external resonator (0.5% tolerance)Max 150mA outputDC input 3.3V up to 12VOver current protected..
₹280.00
Showing 1 to 12 of 15 (2 Pages)
This is the sticky Notification module. You can use it for any message such as cookie notices, special promotions, or any other important text.
Track Order