-200x200w.jpg "Stepper Motor")
Model: ISC 915
Product Specifications:A single module can drive an 8 * 8 common cathode latticeModule Operating voltage: 5V.Module size: 12.8x3.2x1.3cm/5.04"x1.26"x0.51"Module with input and output interfaces, supports multiple modules cascadeWith 64 screws hole, aperture 3mm...
₹920.00
Model: ISC 1641
Product Specification:A single module can drive an 8 * 8 common cathode latticeModule Operating voltage: 5V.Wiring instructions: 1. The module left side as an input port and the output port on the right; 2. To control a single module, just connect the input port to the CPU; 3. When cascading multipl..
₹230.00
Model: ISC 703
Product Specifications:Breadboard power supply module, compatible with 5 V, 3.3 VInput voltage: 6.5-12 V (DC) or USB power supplyOutput voltage: 3.3V/5V can switch overMaximum output current: <700 maOn-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use...
₹160.00
Model: ISC 954
Product Specifications:For Original Product Select SOLD AND FULFILLED BY INVENTO SALESSupport Micro SD card, Micro SDHC card (high speed card)board level conversion circuit, namely the interface level for 5V or 3.3VThe communication interface is a standard SPI interfaceLevel conversion circuit: Micr..
₹160.00
Model: ISC 1123
Product Specification:For Original Product Select "Sold and fulfilled by INVENTO SALES"rduino compatible development board using the ATMEL ATtiny85 microcontroller. It has its own USB bootloader and built in USB capability, allowing you to program it with the SDK and also use it as native USB device..
₹270.00
Model: ISC 1064
Product Specification:Working voltage:DC 3.3-5VHigh sensitive microphone and high sensitivityThe module has two outputs: AO, analog output, real-time output of the microphone voltage signal / DO, when the sound intensity reaches a threshold, the output high and low signal threshold - Sensitivity pot..
₹150.00
Model: ISC 805
Product Specifications:Working voltage:DC 3.3-5Vwhen there is sound,outputs low level and the signal lightcan be used for Acoustic control light , give sound and light alarm working with Photosensitive sensor ,and sound control,sound detect.single channel signal output.Main chip:LM393, Electret cond..
₹160.00
Model: ISC 1633
Mini MP3 Player Module MP3 Voice Audio Decoder Board for Supporting TF Card U-Disk IO Serial Port AD
Product Specifications:MP3-TF-16P MP3 Disk TF Card Module Serial Port is a compact and inexpensive MP3 module can be connected directly to the speaker. Module with battery power supply, speaker, the keypad can be used alone, or through the serial port control, as the UNO or any microcontroller with ..
₹250.00
Model: ISC 1611
Product Specifications:Input voltage range (3S-4S LiPo operation): 9-18V DC; Regulated outputs: 5V and 12V outputs; ESC outputs: Continuous current: 25A*4 or 15A*6BEC 5V output: Designed for: RC Receivers, Flight controllers, OSD, and Servos; BEC Mode: Linear Voltage: 5.0 +/- 0.1VDC; Continuous curr..
₹460.00
Model: ISC 1076
Product Specification:This module consist of a common cathode 5mm red/green LED and a 0Ω resistor, Since operating voltage is 2.0v ~2.5v you'll need to use limiting resistors to prevent burnout.Color: Green Red; Diameter: 3mmVoltage (V) :2.0-2.5v; Using a current (MA): 10; Viewing angle: 150Waveleng..
₹140.00
Model: ISC 959
Product Specifications:For Original Product Select SOLD AND FULFILLED BY INVENTO SALESThe MPR121 is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrodeThe MPR121 also features eight LED ..
₹350.00
Model: ISC 289
Product Specifications:Input voltage: DC5V power (current): 150mAmethane, natural gas has better detection sensitivity.TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module)with a DO switch signal (TTL) output and AO analog signal..
₹199.00