-200x200w.jpg "Stepper Motor")
Model: ISC 1088
Analog Hall Magnetic Sensor Module Black Digital Interface 3Pin KY-035 For Mega PIC AVR Raspberry pi
Product Specification:The analog magnetic sensor connected to the power board analog for 5 Interfaces, when analog magnetic sensor to a signal, LED lights, otherwise the lights out.Analog magnetic sensor module and a digital interface, built-in 13 LED build a simple circuit to produce a magnetic fla..
₹140.00
Model: ISC 1090
Product Specification:Module introduces:The module is based on the thermistor (resistance increases with the ambient temperature . changes) works, a sense of real-time to know the temperature of the surrounding environment changes,we send the data to the analog IO, then come down as long as we go th..
₹140.00
Model: ISC 167
Product Specification:Microcontroller: AT91SAM3X8EInput Voltage (recommended): 7-12VFlash Memory: 512 KB all available for the user applicationsSRAM: 96 KB (two banks: 64KB and 32KB)Clock Speed: 84 MHzPackage Include: 1 x Arduino DUE, 1 x USB..
₹2,399.00
Model: ISC 165
Product Specification:Microcontroller ATmega2560-16AUUSB interface chip ATmega16U2Flash Memory 256 KB of which 8 KB used by bootloaderDigital I/O Pins 54 (of which 15 provide PWM output)Input Voltage(recommended) 7-12V..
₹2,999.00
Model: ISC 132
Product Specification:Micro-controller : ATmega328Operating Voltage : 5VDigital I/O Pins : 14 (of which 6 provide PWM output)Clock Speed ：16 MHzPackage Include Arduino UNO R3 x 1 Note: USB is not included in the package..
₹1,499.00
Model: ISC 505
Product Specifications:Pressure range: 300 ~ 1100hPa (elevation of 9000 meters to -500 meters)Power supply voltage: 1.8V ~ 3.6V (VDDA), 1.62V ~ 3.6V (VDDD)Low power consumption: 5μA in standard modeHigh precision: low power mode, the resolution of 0.06hPa (0.5 meters)Contains temperature output..
₹450.00
Model: ISC 300
Product Specifications:This is a CNC Shield for CNC or 3D printerCan drive four axes: four receptacles for A4988, DRV8825 or other StepStick compatible drivers.Headers for XYZA steppers, XYZA end stops, spindle control, ESTOP.Compatible with GRBL firmware. Easy GRBL instillation."Package Include 1 x..
₹280.00
Model: ISC 927-X
Product Specifications:Made In India Color Sensor With 4-Bit Analog OutputBest Detection Range: 10mm. Input Voltage: 3V ~ 5V.Communicate directly with a microcontroller.High-resolution conversion of light intensity to frequency. Programmable color and full-scale output frequency.Package Include 1 x ..
₹250.00
Model: ISC 972
Product Specification:Select Sold and fulfilled by Invento Sales for genuine ProductFiring range: 100 meter (the actual use is about 10-30 meters)Operating voltage: DC 12VOperating frequency: 315MHzPackage included: 1 x Wireless Transmitter + Receiver..
₹820.00
Model: ISC 1619
Product Specifications:The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0V to 5V pulse. (or 0V to 3.3V pulse if you solder SJ2 closed on the EasyDriver). EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of s..
₹280.00
Model: ISC 1428
Product Specifications:This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.Working Volt..
₹260.00
Model: ISC 240
Product Specifications:Model: DHT22; High sensitive temperature humidity sensor. Single-bus digital signal output, bidirectional serial data4 Pins Sequence Number: Pin1-VDD(Power 3.3V-5.5V); Pin2-SDA, serial data interface, two-way interface; Pin3-NC, no connect; Pin4-GND(Ground)Temperature range: -..
₹490.00