-200x200w.jpg "Stepper Motor")
Model: ISC 622
Product Specifications:Model : SHF25Shaft OD : 25mmSize : 70x42x25mmMounting Base Hole Diameter : 7mmMounting Base Holes Centre Distance : 56mm..
₹1,120.00
Model: ISC 617
Product Specifications:Material: AluminiumShaft OD: 8mmSize: 43x24X10mmMounting Hole Diameter: 5.5mmMounting Holes Centre Distance: 32mm..
₹520.00
Model: ISC 040
Product Specifications:Material: AluminiumShaft OD: 10mmSize: 42x14x33mmMounting Hole Diameter: 5.5mmMounting Holes Centre Distance: 32mm..
₹450.00
Model: ISC 042
Product Specifications:Material: AluminiumShaft OD: 12mmSize: 42x14x37mmMounting Hole Diameter: 5.5mmMounting Holes Centre Distance: 32mm..
₹460.00
Model: ISC 687
Product Specifications:Model: SK25Shaft OD: 25mmSize: 70x60x24mmMounting Hole Diameter: 6.6mmMounting Holes Centre Distance: 56mm..
₹720.00
Model: ISC 038
Product Specification:Model: SK8Shaft OD: 8mmSize: 42x14x33mmMounting Hole Diameter: 5.5mmMounting Holes Center Distance: 32mm..
₹390.00
Model: ISC 1802
Product Specification:The SN74HC4020N is a 14-bit Asynchronous Binary Counter that advance on the negative-going edge of the clock pulse. The counters are reset to zero (all outputs low) independently of the clock input when the clear (CLR) input goes high.Outputs can drive up to 10 LSTTL loads; 80µ..
₹140.00
Model: ISC 1803
Product Specification:The SN74HC4040N is a 12-bit Asynchronous Binary Counter with the outputs of all stages available externally. A high level at the clear (CLR) input asynchronously clears the counter and resets all outputs low. The count is advanced on a high-to-low transition at the clock input...
₹140.00
Model: ISC 1759
Product Specifications:The SN74LS47N is a BCD-to-Seven-segment Decoder/Driver features active-low outputs, designed for driving, common-anode LEDs or incandescent indicators directly. The IC for driving lamp buffers or common-cathode LEDs. All of the circuits except LS49 have full ripple-blanking in..
₹160.00
Model: ISC 1779
Product Specifications:The 74LS76 offers individual J, K, Clock Pulse, Direct Set and Direct Clear inputs. These dual flip-flops are designed so that when the clock goes HIGH, the inputs are enabled and data will be accepted.The Logic Level of the J and K inputs will perform according to the Truth T..
₹150.00
Model: ISC 1792
Product Specification:The SN74LS90N is a Decade Counter contains four master-slave flip-flops and additional gating to provide a divide-by-two counter and a three-stage binary counter for which the count cycle length is divide-by-five for the '90A and 'LS90, divide-by-six for the '92A and 'LS92 and ..
₹170.00
Model: ISC 125
Product Specifications:Outside Diameter: 10mmLength: 1000 mm (1mtr)Material: SS 202 (Hard Chromed)Qty: 2pcsApplication: 3D Printer, CNC, Robotics, DIY Projects etc..
₹699.00