-200x200w.jpg "Stepper Motor")
Model: ISC 1088
Analog Hall Magnetic Sensor Module Black Digital Interface 3Pin KY-035 For Mega PIC AVR Raspberry pi
Product Specification:The analog magnetic sensor connected to the power board analog for 5 Interfaces, when analog magnetic sensor to a signal, LED lights, otherwise the lights out.Analog magnetic sensor module and a digital interface, built-in 13 LED build a simple circuit to produce a magnetic fla..
₹140.00
Model: ISC 1090
Product Specification:Module introduces:The module is based on the thermistor (resistance increases with the ambient temperature . changes) works, a sense of real-time to know the temperature of the surrounding environment changes,we send the data to the analog IO, then come down as long as we go th..
₹140.00
Model: ISC 356
Product Specifications:Max input voltage: 30vMax current sensing: 90A6P molex cable plugs directly to apm/arduflyer 2.5s 'pm' connectorSwitching regulator outputs 5.3v and 3a maxVoltage and current measurement configured for 5v DC..
₹820.00
2-3 Days
Model: ISC 148
Product Specifications:This is the new APM 2.8 autopilot module. The sensors are exactly the same as with APM2.6, however this version have an on board compass, which makes this version ideal for use with multi-copters and rovers.Arduino CompatibleIncludes 3-axis gyro, accelerometer and magnet..
₹3,799.00
Model: ISC 167
Product Specification:Microcontroller: AT91SAM3X8EInput Voltage (recommended): 7-12VFlash Memory: 512 KB all available for the user applicationsSRAM: 96 KB (two banks: 64KB and 32KB)Clock Speed: 84 MHzPackage Include: 1 x Arduino DUE, 1 x USB..
₹2,399.00
Model: ISC 165
Product Specification:Microcontroller ATmega2560-16AUUSB interface chip ATmega16U2Flash Memory 256 KB of which 8 KB used by bootloaderDigital I/O Pins 54 (of which 15 provide PWM output)Input Voltage(recommended) 7-12V..
₹2,999.00
Model: ISC 132
Product Specification:Micro-controller : ATmega328Operating Voltage : 5VDigital I/O Pins : 14 (of which 6 provide PWM output)Clock Speed ：16 MHzPackage Include Arduino UNO R3 x 1 Note: USB is not included in the package..
₹1,499.00
Model: ISC 505
Product Specifications:Pressure range: 300 ~ 1100hPa (elevation of 9000 meters to -500 meters)Power supply voltage: 1.8V ~ 3.6V (VDDA), 1.62V ~ 3.6V (VDDD)Low power consumption: 5μA in standard modeHigh precision: low power mode, the resolution of 0.06hPa (0.5 meters)Contains temperature output..
₹450.00
Model: ISC 816
Product Specifications:Voltage : 3-12 V DCShaft Diameter: 5.3 x 3.7mmShaft Length: 9 mmTorque : 500 gf-cmNo Load Speed: 200 RPM..
₹130.00
Model: ISC 300
Product Specifications:This is a CNC Shield for CNC or 3D printerCan drive four axes: four receptacles for A4988, DRV8825 or other StepStick compatible drivers.Headers for XYZA steppers, XYZA end stops, spindle control, ESTOP.Compatible with GRBL firmware. Easy GRBL instillation."Package Include 1 x..
₹280.00
Model: ISC 927-X
Product Specifications:Made In India Color Sensor With 4-Bit Analog OutputBest Detection Range: 10mm. Input Voltage: 3V ~ 5V.Communicate directly with a microcontroller.High-resolution conversion of light intensity to frequency. Programmable color and full-scale output frequency.Package Include 1 x ..
₹250.00
Model: ISC 1317
Product Specification:Input: 220V AC, 50 HzPower: 650 Watts; Width of Cutter - 82mmNo Load Speed: 14000 RPMNote: Color of the machine may vary as it will be supplied as per stock availability. If you have any specific color requirement please contact us before ordering. Drill Machine to be used by a..
₹2,899.00