-200x200w.jpg "Stepper Motor")
Model: ISC 703
Product Specifications:Breadboard power supply module, compatible with 5 V, 3.3 VInput voltage: 6.5-12 V (DC) or USB power supplyOutput voltage: 3.3V/5V can switch overMaximum output current: <700 maOn-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use...
₹160.00
Model: ISC 202-N
Product Specification:The Gripper module is state of the art robotic arm designed indigenously by Robomart. It can be used in various ‘pick and place’ kind of robots. It works on DC Motor (9 to 12V DC). Change in rotation direction of the DC Motor, generates Jaw Open & Close Action.The DC motor ..
₹1,050.00
Model: ISC 1458
Product Specification:Full integration on one board: Mega R3 ATmega2560 and WiFi ESP8266 with memory 32Mb (megabyte)All of the modules can work together or each separately. And everyone has their own pinout headersThe convenient solution for the development of new projects requiring Uno and WiFiVia ..
₹1,499.00
Model: ISC 1069
Product Specification:The module is based on a touch-sensing IC (TTP223B) capacitive touch switch. In the normal state, the modules output is low and is in lower power consumption mode; When a finger touches the corresponding position, the modules output is high, if not touched for 12 seconds, it sw..
₹140.00
Model: ISC 009
Product Specification:Stall torque: 1.8kg-cm (5v)2.2kg or cm (6.6v)Operating speed: 0.10sec or 60degree (4.8v)Operating voltage: 5 to 7Package Include 1 x MG 90S SERVO MOTOR WITH ATTACHMENTSItem SKU: ISC 009..
₹360.00
Model: ISC 011
Product Specification:Operation Voltage : 4.8 - 7.2VoltsOperating Speed : 0.13sec / 60 degrees (6.0V no load)Stall Torque : 15 kg-cm (208.3 oz-in) at 6VGreat for truck, Boat, Racing Car, Helicopter and Airplane.Dimension : 40 x 19 x 43mmPackage Include: 1 x MG996R MotorItem SKU: ISC 009..
₹520.00
Model: ISC 954
Product Specifications:For Original Product Select SOLD AND FULFILLED BY INVENTO SALESSupport Micro SD card, Micro SDHC card (high speed card)board level conversion circuit, namely the interface level for 5V or 3.3VThe communication interface is a standard SPI interfaceLevel conversion circuit: Micr..
₹160.00
Model: ISC 1123
Product Specification:For Original Product Select "Sold and fulfilled by INVENTO SALES"rduino compatible development board using the ATMEL ATtiny85 microcontroller. It has its own USB bootloader and built in USB capability, allowing you to program it with the SDK and also use it as native USB device..
₹270.00
Model: ISC 360
Product Specifications:ATmega8 Microcontroller Board with Atmega8, L293D & HT92B70 ICNo Separate programmer required for board, it can be easily program by USB ConnectionSpecially designed bootloader mode that run on 12MHz by using BOOT button on board23 Pin breakout are available for outside de..
₹920.00
Model: ISC 1064
Product Specification:Working voltage:DC 3.3-5VHigh sensitive microphone and high sensitivityThe module has two outputs: AO, analog output, real-time output of the microphone voltage signal / DO, when the sound intensity reaches a threshold, the output high and low signal threshold - Sensitivity pot..
₹150.00
Model: ISC 805
Product Specifications:Working voltage:DC 3.3-5Vwhen there is sound,outputs low level and the signal lightcan be used for Acoustic control light , give sound and light alarm working with Photosensitive sensor ,and sound control,sound detect.single channel signal output.Main chip:LM393, Electret cond..
₹160.00
Model: ISC 1633
Mini MP3 Player Module MP3 Voice Audio Decoder Board for Supporting TF Card U-Disk IO Serial Port AD
Product Specifications:MP3-TF-16P MP3 Disk TF Card Module Serial Port is a compact and inexpensive MP3 module can be connected directly to the speaker. Module with battery power supply, speaker, the keypad can be used alone, or through the serial port control, as the UNO or any microcontroller with ..
₹250.00