-200x200w.jpg "Stepper Motor")
Search Criteria
Products meeting the search criteria
Model: ISC 1421
Product Specifications:Level control interface for 5V or 3.3VPositioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter-module combinationControl Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the..
₹170.00
Model: ISC 961
Product Specifications:Package Include 1 x 0.96'' OLEDInterface: I2C interface.Screen Size: 0.96 inch, Resolution: 128 X 64.Working current: 25mA (Max).Dimensions: 1.38 in x 1.34 in x 0.47 in (3.5*3.4*1.2cm)...
₹399.00
Model: ISC 1647
Product Specification:LED Back light: Blue/Yellow Green (Depend on Stock Availability)Display capacity: 8 × 2 characters; Controller: SPLC78DModule Outline Size: 58 x 32 x 10 mm; View Area: 37.8 x 16 mmWorking temperature: -20~+70°C; Storage temperature: -30~+80°CPackage Include 1 x LCD..
₹250.00
Model: ISC 848
Product Specifications:VCC: Power interface ,5VIN: Control interface .Drive Current at least 4mAWith power and relay action indication, bright when connect and go off when disconnects.It can be not only used as a microcontroller development board module, but also as a home appliance control.It can n..
₹130.00
Model: ISC 1901-2
Product Specifications:Outer Diameter: 33mm; No. of teeth: 12; Thickness (Teeth Portion): 10mm; Teeth Type: HelicalCompatible shaft size: 6mm; Module: 2.5; Hub Diameter: 20mm; Hub Length: 10mm; Check picture for exact dimensionsColor of Gear may be changed from picture. If you have any specific colo..
₹150.00
Model: ISC 1902-2
Outer Diameter: 43mm; No. of teeth: 16; Thickness (Teeth Portion): 15mm; Teeth Type: HelicalCompatible shaft size: 6mm; Module: 2.5; Hub Diameter: 25mm; Hub Length: 10mm; Check picture for exact dimensionsColor of Gear may be changed from picture. If you have any specific color requirement please co..
₹190.00
Model: ISC 1903-2
Product Specifications:Outer Diameter: 53mm; No. of teeth: 20; Thickness (Teeth Portion): 15mm; Teeth Type: HelicalCompatible shaft size: 6mm; Module: 2.5; Hub Diameter: 25mm; Hub Length: 10mm; Check picture for exact dimensionsColor of Gear may be changed from picture. If you have any specific colo..
₹220.00
Model: ISC 1904-2
Product Specifications:Outer Diameter: 66mm; No. of teeth: 25; Thickness (Teeth Portion): 15mm; Teeth Type: HelicalCompatible shaft size: 6mm; Module: 2.5; Hub Diameter: 25mm; Hub Length: 15mm; Check picture for exact dimensionsColor of Gear may be changed from picture. If you have any specific colo..
₹350.00
Model: ISC 1465-A
Product Specifications:Load cell：Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-10kgLoad cell specs: 22 cm (8.5 in) wire leads pre-attached. Dimensions 12.7 mm high, 12.7 mm wide, 80 mm long (0.5 in x 0.5 in x 3.15 in). ..
₹399.00
Model: ISC 1339
Product Specification:TTP226, onboard capacitive touch sensor IC 16 keysWorking voltage: 2.4V - 5.5VFunctions: output mode, key output mode, maximum output time, fast / low power selection, etc.Size: Approx. 49.3×64.5×5mm/ 1.94×2.54×0.20 inchPackage Include 1 x Touch Sensor..
₹220.00
Model: ISC112
Product Specifications:LCD display module with blue blacklighWide viewing angle and high contrastBuilt-in industry standard HD44780 equivalent LCD controllerCommonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices.LC..
₹199.00
Model: ISC 1648
Product Specification:LED Back light: Blue/Yellow Green (Depend on Stock Availability)Display capacity: 16 × 2 characters; Voltage : 5V DC; Built-in industry standard HD44780 equivalent LCD controller.Module Outline Size: 80 x 35 x 9 mm; View Area: 65 x 16 mmWorking temperature: -20~+70°C; Storage t..
₹270.00