-200x200w.jpg "Stepper Motor")
Search Criteria
Products meeting the search criteria
Model: ISC 1073
Product Specification:RGB LED module LED is made of a plug-in full-color, by R, G, B three-pin PWM input voltage can be adjusted in three primary colors (red / blue / green) strength in order to achieve full color mixing effect. Control module with cool lighting effects can be achieved.Operating vol..
₹140.00
Model: ISC 1649
Product Specification:LED Back light: Blue/Yellow Green (Depend on Stock Availability)Display capacity: 20 × 4 characters; Voltage : 5V DCModule Outline Size: 98 x 60 x 12mm.Working temperature: -20~+70°C; Storage temperature: -30~+80°CPackage Include 1 x LCD..
₹580.00
Model: ISC 975
Product Specification:Designed for Raspberry pi model b / b + / 2320 x 480 resolution, better displaySupport software keyboard (system interaction without a keyboard / mouse)An ideal alternative for hdmi monitorPackage Include: 1 x Raspberry Pi LCD..
₹2,099.00
Model: ISC 1012
Product Specification:This is a set of 37 sensors ready to be connected up to a microcontroller, e.g. UNO or RaspberryPi.A great package for UNO experiments or as a basis for a larger project.note: this item comes with Plastic protective component boxPackage Included: 1 x Small passive buzzer module..
₹1,799.00
Model: ISC 1084
Product Specification:KY-017 mercury tilt switch module, it uses a small mercury ball that completes the circuit when you tilt the module.This module consists of a mercury switch, a 680Ω resistor and a LED that will light up when tilt is detected. The mercury ball will open/close the circuit when th..
₹140.00
Model: ISC 1086
Product Specification:Photoresistors are semiconductor photosensitive devices, in addition to having high sensitivity, fast response, consistent with the spectral characteristics and value of good features Under a high temperature, and humidity in harsh environmentsit also can maintain a high degree..
₹140.00
Model: ISC 1764
Product Specifications:The TSOP1838 or VS1838 is a miniaturized receivers for infrared remote control systems. PIN diode and pre-amplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor.TSOP1838/VS183..
₹140.00
Model: ISC 137
Product Specifications:This relay module is 5V active low.It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Ardu, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other eqipments with large current.Re..
₹499.00
Model: ISC 1088
Analog Hall Magnetic Sensor Module Black Digital Interface 3Pin KY-035 For Mega PIC AVR Raspberry pi
Product Specification:The analog magnetic sensor connected to the power board analog for 5 Interfaces, when analog magnetic sensor to a signal, LED lights, otherwise the lights out.Analog magnetic sensor module and a digital interface, built-in 13 LED build a simple circuit to produce a magnetic fla..
₹140.00
Model: ISC 1090
Product Specification:Module introduces:The module is based on the thermistor (resistance increases with the ambient temperature . changes) works, a sense of real-time to know the temperature of the surrounding environment changes,we send the data to the analog IO, then come down as long as we go th..
₹140.00
Model: ISC 914
Product Specifications:The knock sensor, detects the knocks and the taps. It can work like a switch. The sensor output normally stays at High logic. The spring inside this sensor vibrates when knock or tap is detected and sends pulse or multiple high low pulses.Working voltage: DC 3~5VDefault Output..
₹199.00
Model: ISC 146
Product Specifications:All kinds of satellites set-top box upgradeRouter,HDD,ADSL,broad band modem firmware upgrade or cracked upgradecellphone,XBOX360,GPS serial communication,vehicle inspection and test,DVD flash and so onBurn write STC MCU,NXP MCU,renesas MCU,NEC MCU and so onSimple UART communic..
₹190.00