-200x200w.jpg "Stepper Motor")
Search Criteria
Products meeting the search criteria
Model: ISC 848
Product Specifications:VCC: Power interface ,5VIN: Control interface .Drive Current at least 4mAWith power and relay action indication, bright when connect and go off when disconnects.It can be not only used as a microcontroller development board module, but also as a home appliance control.It can n..
₹130.00
Model: ISC 1740-2
Product Specification:Small sensor can detect horizontal tilt, vertical flip, shock and vibration. It is formed by two contacts and two small metal spheres. When the sensor is in a horizontal position, the spheres connect contacts between them (ON-state), closing the circuit, when it is tilted more ..
₹170.00
Model: ISC 921
Product Specifications:Arduino LCD1602 character LCD expansion board, the motherboard uses a new high-quality 2 lines of 16 characters LCD, not only has a contrast adjustment knob, backlight selector switchDisplay capacity: 16 × 2 charactersChip operating voltage: 4.5-5.5VWorking current: 2.0mA (5.0..
₹380.00
Model: ISC 1083
Product Specification:Dimming principle is to use the principle of two modules brightness changes for pwm.Mercury switches provide a digital signal that triggers the PWM , through the program design, We can see the light like two cups filled with the effect of shuffling back and forth.Working Voltag..
₹140.00
Model: ISC 1092
Product Specification:The KY-022 module is ideally suited to infrared light detection within the range of 700nm – 1mm, typically seen in project robots and remote control receivers. The data pin outputs HIGH when the sensor is triggered. Working at a low 3.3 – 5V input the module will output HIGH va..
₹130.00
Model: ISC 983
Product Specification:For Original Product Select SOLD AND FULFILLED BY INVENTO SALES2.4" diagonal LCD TFT display, with bright 4 white-LED backlight, default state: on240X320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade4-wire resistive touchscreenPower supply: 5V-26V, if the 5..
₹670.00
Model: ISC 1341
Product Specification:Detection distance: 3-12mmDetection method: infrared non-modulation reflection detection (note to avoid the strong light)Output signal: 5V digital level (white line high, black line low)Platform: MR2 smart car or other intelligent carInfrared light detection black and white lin..
₹280.00
Model: ISC 1047
Product Specification:Screen Size: 3.5 InchInput Voltage: DC 3.3 - 5.5V Support Arduino UNO & Mega2560 Directly insertedWith SD Card SocketResolution: 480 x 320Bus used: 8-bitTouch: NoDriver: ILI9486Module size: 55.63mm x 83.49mmPackage Include: 1 x 3.5 Inch Display..
₹1,299.00
Model: ISC 1012
Product Specification:This is a set of 37 sensors ready to be connected up to a microcontroller, e.g. UNO or RaspberryPi.A great package for UNO experiments or as a basis for a larger project.note: this item comes with Plastic protective component boxPackage Included: 1 x Small passive buzzer module..
₹1,799.00
Model: ISC 1084
Product Specification:KY-017 mercury tilt switch module, it uses a small mercury ball that completes the circuit when you tilt the module.This module consists of a mercury switch, a 680Ω resistor and a LED that will light up when tilt is detected. The mercury ball will open/close the circuit when th..
₹140.00
Model: ISC 1835
Product Specifications:1800 mAh Battery Capacity; 5.5mm x 2.1mm Adapter Port for Arduino UNO Power JackVoltage: 5 Volts; Battery Type: 4 Cell AA Cell Ni-mhBattery Size: 57x50x14.5 mm (LxWxH)Application: Cordless Phones, Toys, Toy Car, Small DRONES, GPS, Mp4 player, ipod, DVD,Mobiles backup power sup..
₹520.00
Model: ISC 132
Product Specification:Micro-controller : ATmega328Operating Voltage : 5VDigital I/O Pins : 14 (of which 6 provide PWM output)Clock Speed ：16 MHzPackage Include Arduino UNO R3 x 1 Note: USB is not included in the package..
₹1,499.00