-200x200w.jpg "Stepper Motor")
Search Criteria
Products meeting the search criteria
Model: ISC 1010
Product Specification:This N20-12V-100 Rpm Micro Metal Gear Motor has small volume, torsion big, all metal gear, durable, not easy to wear. Great replacement for the rusty or damaged DC geared speed reduce motor on the machine. Widely used on Boat, Car, Electric Bicycle, Fan, Home Appliance.Size: 24..
₹320.00
Model: ISC 1303
Product Specification:Model: N20; Size: 10x12x15mmRPM: 6000 RPMVoltage: 3.7VAmpere: 0.5ATorque: 5 g-cmShaft Diameter: 1mmDirection of Rotation: Clockwise (CW)Propeller Length: 55mmPackage Include 2 x N20 Motor, 2 x 55mm Propeller..
₹150.00
Model: ISC 1747
Product Specifications:High-voltage, high-current darlington arrays each contains seven open collector darlington pairs with common emitters. Suitable for relay drivers, stepper and DC brushed motor drivers, lamp drivers, display drivers (LED and gas discharge), line drivers and logic buffers.Output..
₹150.00
Model: ISC 753
Product Specifications:The ULN2001, ULN2002, ULN2003 and ULN 2004 are high voltage, high current Darlington arrays each containing seven open collector Darlington pairs with common emitters. Each channel rated at 500 mA and can withstand peak currents of 600 mA.Suppression diodes are included for in..
₹130.00
Model: ISC 1718-2
Product Specifications:Gear: 9 teeth plastic gear, outside diameter(OD) 3.3mm, overall length (L) 3.80 mmModel: N20, Size: 10x12x15mmRPM: 6000 RPM; Voltage: 3.7V; Ampere: 0.5A; Torque: 5 g-cmShaft Diameter: 1mm; Direction of Rotation: Clockwise (CW)Package Include 4 x N20 DC Motor with 9 teeth Gear..
₹240.00
Model: ISC 1922-2
Product Specifications:Model: N10; Size: 10x12x15mm; RPM: 6000 RPMRPM: 6000 RPM; Voltage: 3.7V; Ampere: 0.5A; Torque: 5 g-cmShaft Diameter: 1mmPropeller Length: 50mm; Rotating Dia: 50mm; Note: Propeller Color can be different as shown in picture, propeller color will be supplied as per stock availab..
₹170.00
Model: ISC 1928-2
Product Specifications:Model: N20 Dual Shaft; Size: 10x12x15mmRPM: 6000 RPM; Voltage: 3.7V; Ampere: 0.5A; Torque: 5 g-cmDual Shaft - Shaft Diameter: 1mm; Shaft Length: 4.5mmPropeller Length: 50mm - 3Blade; Rotating Dia. - 50mm; Note: Propeller Color can be different as shown in picture, propeller co..
₹160.00
Model: ISC 708
Product Specifications:5 Line 4 phase can be driven by ordinary uln2003 chip can also be connected in phase 2 development board used forStep angle: 5.625 x 1 / 64Reduction ratio: 1 / 64supporting the use of a direct plug and easy to use stepper motor used in the development boardA, B, C, D four-phas..
₹220.00
Model: ISC 137
Product Specifications:This relay module is 5V active low.It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Ardu, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other eqipments with large current.Re..
₹499.00
Showing 1 to 9 of 9 (1 Pages)